Pressure Sensor
Hydraulics
Run the live example
Free · no sign-up · runs in your browser
The Pressure Sensor turns the gauge pressure at its port into an ordinary signal, for a scope, a display or a controller. It draws no flow.
Real-World Analog: Represents an industrial piezoresistive pressure transducer, Bourdon tube gauge, or hydraulic pressure switch measuring line pressure without diverting flow.
Mathematical Model
Where:
p_Pis the gauge pressure at port P (Pa)
Inputs & Outputs
| Direction | ID | Label | Type | Status |
|---|---|---|---|---|
| → In | p |
P | number | Required |
| ← Out | out |
Out | number | Output |
Usage Examples
Hydraulic Line Gauge Pressure Monitoring
The example examples/basic-pressuresensor.json non-invasively taps an active 20 bar hydraulic line to output instantaneous gauge pressure to a scope.
Valve closing against a relief valve
The example examples/basic-hydraulicpipe.json feeds a valve from a 20 bar oil supply through a pipe.
Remarks & Best Practices
- Gauge pressure: every hydraulic pressure is relative to ambient; an open tank is 0 Pa.
- Units: pressure in Pa (1 bar = 100 000 Pa), flow in m³/s (1 L/min ≈ 1.667e-5 m³/s).
Related Components
- FluidReservoir: Fluid Reservoir
- HydraulicPipe: Hydraulic Pipe
- HydraulicValve: Hydraulic Valve
- ReliefValve: Relief Valve
- HydraulicVolume: Hydraulic Volume
- FlowSensor: Flow Sensor