Fluid Reservoir
Hydraulics
Run the live example
Free · no sign-up · runs in your browser
The Fluid Reservoir is a tank or supply held at a set gauge pressure. Every hydraulic network needs at least one: it is the network's reference, and its Medium parameter decides the fluid the whole network carries.
An open tank is 0 Pa. A pressurised supply is a reservoir at, say, 20 bar. A wired Ctrl signal overrides the pressure parameter, so a supply can be ramped or switched.
Real-World Analog: Represents an unpressurized vented oil tank, hydraulic sump, or return reservoir that establishes the zero-gauge baseline pressure of the circuit.
Mathematical Model
Where:
p_Pis the gauge pressure at port P (Pa)p_setis the pressure parameter (Pa)
Inputs & Outputs
| Direction | ID | Label | Type | Status |
|---|---|---|---|---|
| → In | in |
Ctrl | number | Optional |
| → In | p |
P | number | Required |
| → In | H |
H | number | Optional |
Parameters
| Parameters | Label | Type | Default | Description |
|---|---|---|---|---|
pressure |
Pressure (gauge) | number | 0 |
Pressure relative to ambient; 0 is an open tank |
medium |
Medium | select | Oil |
Every reservoir of one network must name the same medium |
temperature |
Temperature | number | 313.15 |
Sets density and viscosity of oil and water |
custom_density |
Custom density | number | 1000 |
Used when Medium is Custom |
custom_viscosity |
Custom viscosity | number | 0.001 |
Used when Medium is Custom |
custom_bulk_modulus |
Custom bulk modulus | number | 1500000000 |
Used when Medium is Custom |
steady_start |
Steady start | boolean | true |
Start the whole network in its steady state, flows already running, instead of at rest |
Usage Examples
Pressurized Supply and Atmospheric Return Tank
In examples/basic-fluidreservoir.json, two FluidReservoir blocks establish boundary potentials: a 20 bar pressurized supply feeds a valve circuit while an open return tank at 0 bar gauge safely receives returned oil.
Single pipe feeding from a reservoir
A 20 bar reservoir feeds a valve through a hydraulic pipe.
Remarks & Best Practices
- Two reservoirs: a supply and a return tank may sit at different pressures; both are sources to ambient.
- Same node, different pressures: two reservoirs wired to one node at different pressures have no solution, and the run stops with that message.
- Gauge pressure: every hydraulic pressure is relative to ambient; an open tank is 0 Pa.
- Units: pressure in Pa (1 bar = 100 000 Pa), flow in m³/s (1 L/min ≈ 1.667e-5 m³/s).
Related Components
- HydraulicPipe: Hydraulic Pipe
- HydraulicValve: Hydraulic Valve
- ReliefValve: Relief Valve
- HydraulicVolume: Hydraulic Volume
- PressureSensor: Pressure Sensor
- FlowSensor: Flow Sensor