Thermal Resistor
ThermalThe Thermal Resistor block models conductive heat transfer between two thermal ports (Fourier's law of thermal conduction in lumped form). It provides a linear thermal resistance between port A and port B, transferring heat proportionally to the temperature difference across the ports.
Because the Thermal Resistor is an acausal conserving component, heat flow can pass in either direction depending on the temperature differential, and its relationship is stamped into the conductance matrix during Modified Nodal Analysis (MNA).
Real-World Analog: Represents solid conduction through an insulating wall, thermal interface grease layer, or refractory brick lining resisting heat conduction.
Mathematical Model
The conductive heat flux is defined by Fourier's law:
Where:
Qis the heat flow from port A to port B in Watts (W).T_Ais the absolute temperature at port A in Kelvin (K).T_Bis the absolute temperature at port B in Kelvin (K).R_{th}is the thermal resistance parameter in Kelvin per Watt (K/W).G_{th} = 1 / R_{th}is the thermal conductance in Watts per Kelvin (W/K).
For a solid slab of length , cross-sectional area , and thermal conductivity :
Inputs & Outputs
| Direction | ID | Label | Type | Status |
|---|---|---|---|---|
| → In | p |
A | number | Required |
| → In | n |
B | number | Required |
Parameters
| Parameters | Label | Type | Default | Description |
|---|---|---|---|---|
resistance |
Thermal Resistance (Rth) | number | 1 |
Thermal conduction resistance in Kelvin per Watt |
Usage Examples
Thermal Insulator Wall
Model conductive heat dissipation through an insulated housing wall:
ThermalMass(casing) -> ThermalResistor(resistance: 4.5) -> TemperatureSource(ambient)
Heat Sink Conduction Path
Simulate heat conducting through an aluminum heat spreader into a chassis:
HeatFlowSource -> ThermalResistor(resistance: 0.15) -> Convection -> AmbientRemarks & Best Practices
- Bidirectional Heat Flow: Heat naturally flows from higher temperature to lower temperature following the Second Law of Thermodynamics.
- MNA Stamping: Adds thermal conductance into the nodal matrix diagonal and off-diagonal entries.
- Series & Parallel Addition: Thermal resistors in series sum resistances (); in parallel they sum conductances ().
- WASM Performance: Stamped and solved directly in compiled WebAssembly.
Related Components
- ThermalMass: Lumped heat capacitance and energy storage
- Convection: Convective heat transfer between surfaces and fluids
- HeatFlowSensor: Measures heat flow rate through a thermal branch
- TemperatureSource: Ideal boundary temperature condition