Convective Heat Transfer
Thermal
Run the live example
Free · no sign-up · runs in your browser
The Convection block models Newton's law of cooling between a solid boundary surface and a moving fluid stream (liquid or gas). It acts as an equivalent thermal resistance between thermal port A (surface) and thermal port B (fluid stream).
Because Convection is an acausal conserving component, heat can transfer from surface to fluid (cooling) or from fluid to surface (heating), stamped into the conductance matrix during Modified Nodal Analysis (MNA).
Real-World Analog: Represents natural or forced air cooling across a finned heat sink or radiator surface transferring heat into ambient air.
Mathematical Model
The convective heat transfer rate is defined by Newton's law of cooling:
Where:
Qis the convective heat flow rate from port A to port B in Watts (W).his the convective heat transfer coefficient in Watts per square meter-Kelvin ().Ais the heat transfer surface area in square meters ().T_Ais the solid surface temperature at port A in Kelvin (K).T_Bis the fluid bulk temperature at port B in Kelvin (K).
In conductance terms, the equivalent thermal resistance is:
Inputs & Outputs
| Direction | ID | Label | Type | Status |
|---|---|---|---|---|
| → In | p |
A | number | Required |
| → In | n |
B | number | Required |
Parameters
| Parameters | Label | Type | Default | Description |
|---|---|---|---|---|
heat_transfer_coefficient |
Heat Transfer Coeff. (h) | number | 25 |
Convective heat transfer coefficient in W/(m²·K) (e.g. 5-25 for air natural convection, 50-500 for forced air, 500-10000 for water) |
surface_area |
Surface Area (A) | number | 0.1 |
Effective convective heat exchange surface area in square meters |
emissivity |
Surface Emissivity (ε) | number | 0 |
Surface emissivity for linearized Stefan-Boltzmann radiation (0 = pure convection, 0.8-0.95 for painted/anodized surfaces) |
reference_temperature |
Radiation Ref. Temp. (T_ref) | number | 293.15 |
Reference temperature in Kelvin used for radiative linearization: h_rad = 4·ε·σ·T_ref³ |
Usage Examples
Air-Cooled Heat Sink Fin
Cool an electronic component using natural air convection:
ThermalMass(CPU) -> Convection(h: 15, area: 0.05) -> TemperatureSource(ambient: 298.15)
Liquid Cooling Channel
Model forced convective heat dissipation inside a liquid-cooled cold plate:
ThermalMass(motor) -> Convection(h: 1500, area: 0.02) -> TemperatureSource(coolant: 310)Remarks & Best Practices
- Regime Flexibility: Accommodates both free/natural convection and forced convection by setting appropriate values.
- Equivalent Conductance: Stamped as conductance in the MNA system matrix.
- Second Law Consistency: Heat exchange naturally ceases when surface temperature reaches fluid temperature ().
- WASM Performance: Evaluated at machine speed in WebAssembly without numerical stiffness artifacts.
Related Components
- ThermalMass: Lumped heat capacitance and energy storage
- ThermalResistor: Linear thermal conduction resistance
- TemperatureSource: Ambient or coolant temperature boundary
- HeatFlowSensor: In-line heat flux transducer