PSENS

Pneumatic Pressure Sensor

Pneumatics
Run the live example Free · no sign-up · runs in your browser

The Pneumatic Pressure Sensor measures differential or absolute pneumatic pressure across terminals A and B without drawing gas mass flow.

Real-World Analog: Corresponds to an electronic piezoresistive pressure transducer or differential pressure gauge, measuring manifold boost pressure, filter clogging drops, or reservoir charge level.

Mathematical Model

The sensor computes the across-variable potential difference between conserving pneumatic nodes without introducing flow shunt impedance:

out=pA−pBout = p_A - p_B

For absolute pressure measurement, connect terminal B directly to a PneumaticAtmosphere reference node (pB=101,325 Pap_B = 101{,}325\,\text{Pa}).

Inputs & Outputs

Direction ID Label Type Status
→ In port_a A number Required
→ In port_b B number Required
← Out out out number Output

Usage Examples

Differential restriction pressure monitoring

In examples/basic-pneumaticpressuresensor.json, the sensor measures differential pressure drop across a throttling orifice fed from a 6 bar supply down to ambient exhaust and outputs Pa to a display scope via a bar scaling gain.

Airline filter clogging monitor

Connected across an inline particulate air filter to measure differential pressure drop Δp=pin−pout\Delta p = p_{\text{in}} - p_{\text{out}}, detecting saturated filter elements when Δp>0.5 bar\Delta p > 0.5\,\text{bar}.

Remarks & Best Practices

  • Infinite impedance: Draws exactly zero mass flow (m˙A=m˙B=0\dot{m}_A = \dot{m}_B = 0), leaving circuit dynamics unaltered.
  • Unit conversion: Emits pressure in standard SI Pascals (Pa\text{Pa}). Multiply by 10−510^{-5} using a Gain block to display engineering values in bar\text{bar}.

Related Components