PPIPE

Pneumatic Pipe

Pneumatics
Run the live example Free · no sign-up · runs in your browser

The Pneumatic Pipe models an airline, hose, or distribution manifold causing pressure drop and flow resistance according to geometry and fluid friction.

Real-World Analog: Represents a pneumatic hose, polyurethane airline tubing, or distribution manifold with laminar/turbulent flow resistance and pressure drop.

Mathematical Model

Δp=f(LD)ρv22  ⟺  m˙=fISO(Cpipe,b,pA,pB)\Delta p = f\left(\frac{L}{D}\right) \frac{\rho v^2}{2} \iff \dot{m} = f_{ISO}(C_{pipe}, b, p_A, p_B)

Inputs & Outputs

Direction ID Label Type Status
→ In port_a A number Required
→ In port_b B number Required

Parameters

Parameters Label Type Default Description
length Length number 1 Pipe length in meters
diameter Inner diameter number 0.01 Inner bore diameter of the airline
sonic_conductance Sonic conductance number - Equivalent line sonic conductance C; leave empty to estimate it from length and diameter
critical_pressure_ratio Critical ratio (b) number 0.528 Critical pressure ratio b (0.528 for air)

Usage Examples

Long distribution line pressure drop

In examples/basic-pneumaticpipe.json, a 5-meter pneumatic pipe (8 mm bore) delivers compressed air from a 6 bar supply to an exhaust valve, measuring the friction pressure drop.

Sizing airline diameter

Comparing pressure drop when switching between 6 mm and 10 mm internal bore hoses.

Remarks & Best Practices

  • Friction losses: Accounts for wall friction and line geometry.
  • Conserving: Conserves mass flow rate between port A and port B.

Related Components