Pneumatic Pipe
Pneumatics
运行在线示例
免费 · 无需注册 · 直接在浏览器中运行
Pneumatic Pipe 模块用于模拟压缩空气输送管路中的沿程阻力与压力损失。
实际工程类比: 代表气动气管、聚氨酯软管或分配管路,具备层流/湍流粘性流动阻力与压力降。
数学模型
输入与输出
| Direction | ID | Label | 类型 | Status |
|---|---|---|---|---|
| → In | port_a |
A | number | Required |
| → In | port_b |
B | number | Required |
参数
| 参数 | Label | 类型 | 默认值 | 描述 |
|---|---|---|---|---|
length |
Length | number | 1 |
Pipe length in meters |
diameter |
Inner diameter | number | 0.01 |
Inner bore diameter of the airline |
sonic_conductance |
Sonic conductance | number | - |
Equivalent line sonic conductance C; leave empty to estimate it from length and diameter |
critical_pressure_ratio |
Critical ratio (b) | number | 0.528 |
Critical pressure ratio b (0.528 for air) |
使用示例
长距离管网沿程压降
模拟 10 米气管从 6 bar 主管路输送至执行机构的压力损失。
管径选型分析
对比 6 mm 与 10 mm 内径气管在额定流量下的阻力差异。
说明与最佳实践
- 沿程阻力: 综合考虑管壁粗糙度与气体动力学损失。
- 质量守恒: 端口 A 与 B 之间质量守恒。