Hydraulic Volume
Hydraulics
运行在线示例
免费 · 无需注册 · 直接在浏览器中运行
液压容腔是略可压缩的液体腔:流入时压力上升。在管路、油缸或软管储油处放置一个,压力就会随时间上升而非瞬间跳变。
它是液压“电容”,由端口指向环境。
实际工程类比: 代表油缸工作腔、集成阀块内部容腔或液压蓄能器,表现流体可压缩性与容腔刚度。
数学模型
其中:
β为网络液体的体积模量 (Pa)V为容积 (m³)q_in为流入端口的净流量 (m³/s)
输入与输出
| Direction | ID | Label | 类型 | Status |
|---|---|---|---|---|
| → In | p |
P | number | Required |
| → In | H |
H | number | Optional |
参数
| 参数 | Label | 类型 | 默认值 | 描述 |
|---|---|---|---|---|
volume |
Volume | number | 0.0001 |
Fluid volume of the chamber and its lines |
initial_pressure |
Initial pressure (gauge) | number | 0 |
Pressure at t = 0 when the network starts at rest (Steady start off on a reservoir) |
air_fraction |
Entrained air fraction (α₀) | number | 0 |
Free air volume fraction at atmospheric pressure [0..0.2]. At α₀ = 0 bulk modulus is constant; > 0 models soft, spongy fluid compliance at low pressures. |
polytropic_index |
Polytropic exponent (γ) | number | 1.4 |
Polytropic exponent of entrained air bubbles (1.0 = isothermal, 1.4 = adiabatic) |
使用示例
阀门在溢流阀前关闭
示例 examples/basic-hydraulicvolume.json 由 20 bar 油源经管道向阀门供油。管路压力稳定在约 15.8 bar;t = 0.5 s 时阀门关至 10%,18 bar 溢流阀接管流量。请用 TR-BDF2 运行。
说明与最佳实践
- 刚性:油几乎不可压缩,小容积在微秒级响应。请使用 TR-BDF2;显式求解器需要极小步长。
- 表压:所有液压压力均相对于环境;开口油箱为 0 Pa。
- 单位:压力用 Pa(1 bar = 100 000 Pa),流量用 m³/s(1 L/min ≈ 1.667e-5 m³/s)。