Velocity Source
Mechanics
运行在线示例
免费 · 无需注册 · 直接在浏览器中运行
VelocitySource 模块用于在一维平动机械系统中对理想速度发生器进行建模,在法兰 A 与法兰 B 之间强制施加预设相对线速度。
实际工程类比: 代表滚珠丝杠滑台或数控进给轴,以刚性运动学强制执行预定的直线速度曲线。
数学模型
Across 变量狄利克雷边界条件:
输入与输出
| Direction | ID | Label | 类型 | Status |
|---|---|---|---|---|
| → In | in |
Ctrl | number | Optional |
| → In | flange_a |
A | number | Required |
| → In | flange_b |
B | number | Required |
参数
| 参数 | Label | 类型 | 默认值 | 描述 |
|---|---|---|---|---|
velocity |
Velocity (v) | number | 1 |
Imposed linear velocity in m/s |
source_type |
Source Type | select | DC |
DC constant or AC sinusoidal velocity |
frequency |
Frequency (f) | number | 50 |
Frequency in Hz when AC source type is selected |
使用示例
恒速进给台
VelocitySource(velocity=3.0) -> TranslationalDamper(damping_coefficient=6.0) -> TranslationalReference
正弦振动台激励
VelocitySource(velocity=0.5, source_type="AC", frequency=2.0) -> TranslationalSpring(k=1000.0) -> Mass(m=50.0)说明与最佳实践
- 理想源:无论支路反作用力多大,均严格保证端子两端的速度差。
相关模块
- Mass: 平动质量块
- TranslationalSpring: 线性机械弹簧
- ForceSource: 机械力源
- TranslationalReference: 固定参考地