WS

Angular Velocity Source

Mechanics
运行在线示例 免费 · 无需注册 · 直接在浏览器中运行

角速度源模块用于模拟在机械旋转网络中维持规定角速度差的理想速度发生器。该模块在两个守恒法兰端口(flange_a 与 flange_b)之间维持恒定或交流正弦角速度差。

其等效于具有无限刚度的主动驱动源或精密速度伺服驱动器,提供任意所需的反力矩以保持设定转速。

实际工程类比: 代表调速电主轴或内燃机飞轮轴,无论负载转矩如何均强制维持设定角速度。

数学模型

角速度源在其两个法兰之间强制维持跨越变量差:

ωa(t)−ωb(t)=ω(t)\omega_a(t) - \omega_b(t) = \omega(t)

对于直流模式(source_type = "DC"):

ω(t)=ωset\omega(t) = \omega_{\text{set}}

对于交流正弦模式(source_type = "AC"):

ω(t)=ωset⋅sin⁡(2πft)\omega(t) = \omega_{\text{set}} \cdot \sin(2\pi f t)

式中:

  • \omega_a, \omega_b 为法兰 A 与法兰 B 的角速度,单位为弧度/秒(rad/s\text{rad/s})。
  • \omega_{\text{set}} 为设定的角速度幅值,单位为 rad/s\text{rad/s}。
  • f 为振荡频率,单位为赫兹(Hz\text{Hz})。

当连接因果控制端 in 时:

ω(t)=u(t)\omega(t) = u(t)

输入与输出

Direction ID Label 类型 Status
→ In in Ctrl number Optional
→ In flange_a A number Required
→ In flange_b B number Required

参数

参数 Label 类型 默认值 描述
angular_velocity Angular Velocity (ω) number 10 Imposed angular velocity in rad/s
source_type Source Type select DC DC constant or AC sinusoidal speed
frequency Frequency (f) number 50 Frequency in Hz when AC source type is selected

使用示例

恒速传动测试

以恒定转速驱动阻尼器进行稳态能耗分析:

AngularVelocitySource(w=31.4) -> RotationalDamper(d=0.5) -> RotationalReference

扭转谐振正弦激励

以 5 Hz 扫频正弦角速度激励弹性轴系系统:

AngularVelocitySource(w=5.0, type="AC", f=5.0) -> RotationalSpring(k=200) -> Inertia(J=0.1)

说明与最佳实践

  • 跨越源(Across Source):在 MNA 求解器中引入辅助分支方程,与理想电压源完全等价。
  • 无尽转矩特性:若直接刚性连接死负载将产生极大力矩;真实机械连结推荐串联扭转弹簧(RotationalSpring)。
  • 参考端接地:法兰 B 作为转速参考基准,通常连接至 RotationalReference。

相关模块