MPC Controller
Advanced
Lancer l’exemple en direct
Gratuit · sans inscription · dans votre navigateur
Le bloc MPCController est un régulateur prédictif basé sur un modèle (MPC) à temps discret pour systèmes linéaires en espace d'état. À chaque pas de simulation, il résout un problème d'optimisation quadratique (QP) sous contraintes sur un horizon de prédiction fini à l'aide d'un algorithme de point intérieur primal-dual prédicteur-correcteur de Mehrotra, et applique la première commande optimale .
Contrairement au régulateur LQR non contraint, le MPC intègre directement les saturations d'actionneur () et les bornes d'état (). Lorsque la matrice de coût terminal est omise, le bloc calcule la solution stabilisante de l'équation algébrique de Riccati discrète (DARE).
Entrées & Sorties
| Direction | ID | Label | Type | Status |
|---|---|---|---|---|
| → In | in1 |
x₀ | number | Required |
| → In | in2 |
x₁ | number | Optional |
| → In | in3 |
x₂ | number | Optional |
| → In | in4 |
x₃ | number | Optional |
| → In | in5 |
x₄ | number | Optional |
| → In | in6 |
x₅ | number | Optional |
| → In | in7 |
r₀ | number | Optional |
| → In | in8 |
r₁ | number | Optional |
| → In | in9 |
r₂ | number | Optional |
| → In | in10 |
r₃ | number | Optional |
| → In | in11 |
r₄ | number | Optional |
| → In | in12 |
r₅ | number | Optional |
| ← Out | out |
u | number | Output |
| ← Out | valid |
Valid | number | Output |
| ← Out | status |
Status | number | Output |
| ← Out | iterations |
Iterations | number | Output |
| ← Out | cost |
Cost | number | Output |
Paramètres
| Paramètres | Label | Type | Défaut | Description |
|---|---|---|---|---|
nx |
Number of States (nₓ) | number | 2 |
Number of states in the model (1-6). Determines how many x inputs are used. |
horizon |
Prediction Horizon (N) | number | 10 |
Number of steps to predict. Longer horizon → better performance but more computation. |
A |
A (nₓ×nₓ) | matrix | 1 0.1; 0 1 |
State transition matrix. Rows separated by ';'. Example: '1 dt; 0 1' for double integrator with dt=0.1 |
B |
B (nₓ×1) | matrix | 0.005; 0.1 |
Input matrix. One entry per state. Example: 'dt²/2; dt' for double integrator |
sampleTime |
Sample Time | number | 0.1 |
|
Q |
Q (nₓ×nₓ) | matrix | 10 0; 0 1 |
State cost matrix. Diagonal entries penalize state deviations. Larger = faster settling. |
R |
R (1×1) | matrix | 1 |
Input cost weight. Larger R = gentler control effort. Must be positive. |
P |
Terminal Cost P (nₓ×nₓ) | matrix | |
Optional terminal cost. If empty, computed automatically from DARE (infinite-horizon LQR cost-to-go). |
uMin |
Input Min | number | -100 |
Lower bound on control input u |
uMax |
Input Max | number | 100 |
Upper bound on control input u |
xMin |
State Min (per state) | matrix | |
Optional lower bounds on states (1×nₓ matrix). Leave empty to disable state constraints. |
xMax |
State Max (per state) | matrix | |
Optional upper bounds on states (1×nₓ matrix). Leave empty to disable state constraints. |
slackWeight |
State Slack Weight | number | 10000 |
Penalty weight for soft state constraints. Values > 0 guarantee solver feasibility under disturbances. Set to 0 for hard constraints. |
reference |
Enable Reference Tracking | boolean | false |
When enabled, ref0..ref(n-1) inputs are used for offset-free tracking. The controller regulates the deviation from reference. |
Remarques & Bonnes Pratiques
- Warm-Starting: La trajectoire optimale est décalée et mise en cache à chaque pas, accélérant la convergence du solveur QP Mehrotra à 2-3 itérations.
- Contraintes souples: Les contraintes d'état utilisent des variables d'écart (slacks) avec pénalité quadratique et linéaire pour éviter tout blocage d'infaisabilité.