CYL

Pneumatic Cylinder

Pneumatics
Run the live example Free · no sign-up · runs in your browser

The Pneumatic Cylinder is a double-acting cross-domain actuator converting compressed air energy into mechanical translational force and motion. Differential pressure across the extension chamber (A) and retraction chamber (B) acts against piston areas to produce linear thrust. Piston movement conversely causes chamber compression and expansion flows feeding back into the pneumatic network.

Real-World Analog: Represents a double-acting or single-acting linear pneumatic actuator driving automated machinery, clamps, pushers, or robotic end-effectors.

Mathematical Model

The net actuation force transmitted to the mechanical rod terminal is:

F=(pA−patm)⋅AA−(pB−patm)⋅AB+Fstop(x,v)−dcush(x)⋅v+Ffriction(v)F = (p_A - p_{\text{atm}}) \cdot A_A - (p_B - p_{\text{atm}}) \cdot A_B + F_{\text{stop}}(x, v) - d_{\text{cush}}(x) \cdot v + F_{\text{friction}}(v)

Where:

  • p_A, p_B are the absolute pressures in Chambers A and B (Pa)
  • p_{\text{atm}} is the ambient atmospheric pressure (101,325 Pa)
  • A_A = \frac{\pi}{4} D_{\text{piston}}^2 is the full bore piston area (m²)
  • A_B = \frac{\pi}{4} (D_{\text{piston}}^2 - D_{\text{rod}}^2) is the annular rod chamber area (m²)
  • d_{\text{cush}}(x) is the progressive pneumatic end-cushioning damping coefficient near stroke limits:
dcush(x)=dc⋅max⁡(0,1−xlc)for x<lcd_{\text{cush}}(x) = d_c \cdot \max\left(0, 1 - \frac{x}{l_c}\right) \quad \text{for } x < l_c
  • F_{\text{friction}}(v) is the Coulomb seal dry friction force opposing motion:
Ffriction(v)=−Fc⋅sgn⁡(v)F_{\text{friction}}(v) = -F_c \cdot \operatorname{sgn}(v)

The volume displacement mass flow in the chambers coupling into the pneumatic network is:

m˙disp,A=−ρA⋅AA⋅v,m˙disp,B=ρB⋅AB⋅v\dot{m}_{\text{disp}, A} = -\rho_A \cdot A_A \cdot v, \quad \dot{m}_{\text{disp}, B} = \rho_B \cdot A_B \cdot v

Inputs & Outputs

Direction ID Label Type Status
→ In chamber_a A number Required
→ In chamber_b B number Required
→ In rod Rod number Required
→ In in v number Optional
→ In H H number Optional
← Out velocity v number Output
← Out force F number Output
← Out position x number Output
← Out pressure_a pA number Output
← Out pressure_b pB number Output

Parameters

Parameters Label Type Default Description
piston_diameter Piston Diameter (Bore) number 0.05 Cylinder bore diameter in meters (default: 50 mm)
rod_diameter Rod Diameter number 0.02 Piston rod diameter in meters (default: 20 mm)
stroke Stroke Length number 0.2 Total stroke travel in meters (default: 200 mm)
dead_volume Dead Volume number 0.00001 End clearance volume in each chamber (default: 10 cm³)
damping Viscous Friction number 10 Viscous friction damping coefficient of the piston seals
temperature Operating Temperature number 293.15 Working gas temperature (default: 293.15 K / 20 °C)
p_atm Ambient Pressure number 101325 Atmospheric reference pressure (default: 101,325 Pa)
cushion_length End Cushion Length number 0 Length of the pneumatic end cushioning deceleration zone near stroke ends [m]. 0 = no cushioning.
cushion_damping Cushion Damping number 500 Progressive damping coefficient inside the cushioning zone [N·s/m].
coulomb_friction Coulomb Seal Friction number 0 Breakaway friction force of the piston and rod seals opposing motion [N].

Usage Examples

Positioner with 5/3 Proportional Valve

A pneumatic servo positioning loop drives the cylinder chambers with a 5/3 directional valve, moving a mass-spring load to a target position.

Single-Acting Spring-Return Actuator

Chamber A receives pressurized air through an on/off valve to advance the piston, while an external mechanical spring pushes the rod back to its home position when exhausted.

Remarks & Best Practices

  • Cross-Domain Coupling: Couples conserving pneumatic ports (chamber_a, chamber_b) to a conserving translational terminal (rod).
  • Thermal Port (H): Seal friction losses dissipate heat flow Qdiss=d⋅v2Q_{\text{diss}} = d \cdot v^2 through the optional conserving port H.

Related Components